Interlogix xGenConnect NXG-8-Z-B0 - Programming Instructions for Custom Zones

xGenConnect Installation and Programming Guide 115
Next
Zones are assigned to one or more Areas using Area Groups. If necessary,
program Areas and Area Groups, then assign an Area Group to each zone
(step 6).
Programming Instructions for Custom Zones
Goal
Program zones with advanced customization, including setting zone behavior to
follow a schedule or armed/disarmed state.
Pre-conditions
Program the schedule you want the zone to follow if needed. Alternatively use
the defaults.
Programming Sequence
7. Schedules
15. Zone Types
16. Zone options
→
- Area Armed
→
→
- Area disarmed
14. Holidays
3. Zones
4. Areas
12. Area Groups
a) Profile 1
→
a) Area Options
→
b) Profile 2
b) Area Timers
c) Area Reporting
15. Zone Type
7. Schedule
16. Zone Options
18. Channel Groups
12. Area Group
7. Schedule
1. User