Interlogix xGenConnect NXG-8-Z-B0 User Manual

24 xGenConnect Installation and Programming Guide
Shielding
The shielding of all shielded cables used in the system should only be connected
at one side to one common earthing point in a building. If a shielded LAN cable is
routed via more than one plastic device the shielding from incoming and outgoing
cable must be connected.
Termination Links
Put a jumper across TERM on the panel and the furthest device to ensure correct
RS-485 termination and avoid communication issues with signal reflection, etc.

Interlogix xGenConnect NXG-8-Z-B0 Specifications

General

Brand	Interlogix
Model	xGenConnect NXG-8-Z-B0
Category	Control Panel
Language	English