Interlogix xGenConnect NXG-8-Z-B0 User Manual

xGenConnect Installation and Programming Guide 149
Programming Instructions for Scenes
Goal
Create a scene that performs multiple functions when a certain condition is met.
Pre-conditions
The schedule you want the Scene to follow needs to be programmed.
If you wish to perform Z-Wave Device Actions the Z-Wave device(s) must be
learnt in.
Notes
User 99 will be reported for alarm system control events.
Programming Sequence
20. Scenes
Schedules
Z-Wave Devices
Instructions
1. Open Scenes.

Interlogix xGenConnect NXG-8-Z-B0 Specifications

General

Brand	Interlogix
Model	xGenConnect NXG-8-Z-B0
Category	Control Panel
Language	English