Interlogix xGenConnect NXG-8-Z-B0 User Manual

118 xGenConnect Installation and Programming Guide
12. If you are programming a second zone profile, then go to that now and repeat
steps 4 to 7.
Next
Zones are assigned to one or more Areas using Area Groups. If necessary,
program Areas and Area Groups, then assign an Area Group to each zone
(step 8).
Programming Instructions for Areas
Goal
Program Areas, Entry/Exit Times, Reporting Options, and Area Groups.
Pre-conditions
Programmed Communicator, Channels, and Channel Groups.

Interlogix xGenConnect NXG-8-Z-B0 Specifications

General

Brand	Interlogix
Model	xGenConnect NXG-8-Z-B0
Category	Control Panel
Language	English