Interlogix xGenConnect NXG-8-Z-B0 User Manual

xGenConnect Installation and Programming Guide 77
Primary Controller will add xGenConnect to it.
xGenConnect Include button and status will update to indicate it has been
added as Secondary Controller.
5. Save settings on Primary Controller.
Removing xGenConnect from existing Z-Wave network
as Secondary Controller
1. Log in to the panel.
2. Click Settings > Z-Wave Add/Remove.
3. Start the Remove process on the primary controller of the existing network.

Interlogix xGenConnect NXG-8-Z-B0 Specifications

General

Brand	Interlogix
Model	xGenConnect NXG-8-Z-B0
Category	Control Panel
Language	English