xGenConnect Installation and Programming Guide 55
Adding a User
The xGenConnect system supports up to 256 users. Each user is assigned a PIN
code and a user number. This allows them to interact with the system.
1. Log in to the Web Server.
2. Enter your username and password. A master code is required to add users,
by default this is “User 1” (with a space between “User” and “1”) and “1234”.
Then click Sign In.
3. The Arm/Disarm screen will appear:
4. Click Users.
5. Click Add.
6. Enter a unique PIN code between 4 and 8 digits.
7. Enter a First and/or Last Name.
8. Select a User Type:
- Master users can arm and disarm partitions. They can create, delete, or
modify user codes. They can also change system settings.
- Standard users can arm and disarm partitions. But they cannot create
users or review event history.
- Arm only users can only turn on the security system, they cannot disarm,
or dismiss any system conditions.
- Duress users will send a duress event when they are used to arm or disarm
the system.
To Next Page
Loading...
