Interlogix xGenConnect NXG-8-Z-B0 User Manual

xGenConnect Installation and Programming Guide 127
4. Open Users and create a new user. Suggested you provide a descriptive
name such as “Auto Arm User” to make troubleshooting in the future easy.
5. Go to the Advanced tab.
6. Select the Permission you created above. If you want a simple Arm-Disarm
then leave the Schedule here as Always On. The Schedule selected here is

Interlogix xGenConnect NXG-8-Z-B0 Specifications

General

Brand	Interlogix
Model	xGenConnect NXG-8-Z-B0
Category	Control Panel
Language	English