xGenConnect Installation and Programming Guide 131
Instructions
1. Open Communicator.
2. Select reporting options.
3. Select when you want xGenConnect to perform an automatic communication
test.
4. Click IP Config.
5. Edit IP settings for the xGenConnect system, if DHCP is enabled on the
xGenConnect and a DHCP server is available, then this screen will
automatically be filled in.
- Enable Clock Updates: Will keep the time and date correct using the
provided Internet Time Server, no manual adjustment will be needed when
daylight savings occurs provided the time zone is set correctly in System.
To Next Page
Loading...
Need help?
General
