Interlogix xGenConnect NXG-8-Z-B0 User Manual

80 xGenConnect Installation and Programming Guide
3. Check xGenConnect is the primary controller and a secondary controller is
already learnt in to xGenConnect. xGenConnect in Primary Controller mode
has Add, Remove, Cancel, Shift, and Include buttons.
4. Press the Shift button on xGenConnect (the Primary Controller).
5. Press the Exclude button on the Secondary Controller.

Interlogix xGenConnect NXG-8-Z-B0 Specifications

General

Brand	Interlogix
Model	xGenConnect NXG-8-Z-B0
Category	Control Panel
Language	English