22 ZeroWire Installation Manual
7. You should now see a screen similar to the one below:
8. Click Menu – Settings to program your ZeroWire.
9. See the next section “Wireless LAN Setup”, “Wired LAN Setup”, or “3G Cellular Radio
Setup” to connect your ZeroWire permanently to a network so it can report events.
Wireless LAN Setup
We will use your mobile phone or computer to connect ZeroWire to your existing WiFi
network. Your wireless router must support 802.11 b or 802.11g.
1. See above for instructions on accessing the ZeroWire Web Server from a mobile
device.
2. Open Web Browser - Open your web browser and enter http://192.168.1.3. The
ZeroWire login screen should appear:
3. Login - Enter your username and password, by default this is "installer" and 9713.
To internet
Wireless Router
Initial address http://192.168.1.3
To Next Page
Loading...
Need help?
General
