Intermec EasyCoder PD4 Service Manual

Intermec EasyCoder PD4—Service Manual 99
Chapter 14—Troubleshooting
- In case of tickets with black marks, consider if the black marks have
suffi cient blackness or if there is some kind of printing on the back of
the media that may interfere with the label gap sensor.
• Bad friction between platen roller and media.
- Check if the platen roller is slippery, worn out, or dry and hard. Clean
or replace if necessary (see Chapter 7.3).

Intermec EasyCoder PD4 Specifications

General

Brand	Intermec
Model	EasyCoder PD4
Category	Label Maker
Language	English