Before You Begin
viii Intermec EasyCoder PD4—Service Manual
Safety Icons
This section explains how to identify and understand dangers, warnings,
cautions, and notes that are in this document. You may also see icons that
tell you when to follow ESD procedures.
A warning alerts you of an operating procedure, practice, condition, or
statement that must be strictly observed to avoid death or serious injury
to the persons working on the equipment.
A caution alerts you to an operating procedure, practice, condition, or
statement that must be strictly observed to prevent equipment damage
or destruction, or corruption or loss of data.
This icon appears at the beginning of any procedure in this manual
that could cause you to touch components (such as printed circuit
boards) that are susceptible to damage from electrostatic discharge
(ESD). When you see this icon, you must follow standard ESD guide-
lines to avoid damaging the equipment you are servicing.
Note: Notes either provide extra information about a topic or contain spe-
cial instructions for handling a particular condition or set of circumstances.
To Next Page
Loading...
Need help?
General
