Intermec EasyCoder PD4—Service Manual iii
FCC Notice (United States of America)
WARNING
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used
in accordance with the instructions manual, may cause interference to radio communications. It has
been tested and found to comply with the limits for a Class A computing device pursuant to Subpart
J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such inter-
ference when operated in a commercial environment. Operation of this equipment in a residential
area is likely to cause interference in which case the user at his own expense will be required to take
whatever measures may be required to correct the interference.
EMS and EMI Compliance Statement
This equipment has been tested and passed with the requirements relating to electromagnetic com-
patibility based on the standards EN50081-1 (EN55022 CLASS A) and EN61000-4-2/-3/-4/-5/-
6/-8/-11 (IEC Teil 2,3,4). The equipment also tested and passed in accordance with the European
Standard EN55022 for the both Radiated and Conducted emissions limits.
To Next Page
Loading...
Need help?
General
