Intermec EasyCoder PD4 Service Manual

Intermec EasyCoder PD4—Service Manual 57
10
Cutter
This chapter describes the cutter which is an option for EasyCoder PD4
printers with a display. It cannot be fi tted on printers without a display.
Never use the cutter to cut through any kind of adhesive, which will get
stuck on the shears and render the cutter inoperable or even damage
it. If you need to cut self-adhesive labels, be careful to cut the liner
between labels.

Intermec EasyCoder PD4 Specifications

General

Brand	Intermec
Model	EasyCoder PD4
Category	Label Maker
Language	English