Intermec EasyCoder PF2i Service Manual

Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual 227
Chapter 15—Troubleshooting
Ribbon Sensor
Description:
The ribbon sensor is not working properly.
Possible Causes and Suggested Remedies:
• Bad sensor adjustment (Fingerprint only).
- Adjust the sensor in the Setup Mode as described in Chapter 6.4.
• Bad connection or faulty sensor.
- Cable between the ribbon sensor and J56 on the CPU board dam-
aged or not correctly connected?
- Sensor blocked by dust or foreign matters? Clean.
- Faulty ribbon sensor? Replace.
• Bad detection pattern inside ribbon supply bobbin.
- Check the black and silvery sector pattern at the inner end of the
ribbon supply bobbin for scratches or dust.

Intermec EasyCoder PF2i Specifications

General

Brand	Intermec
Model	EasyCoder PF2i
Category	Printer Accessories
Language	English