Intermec EasyCoder PF2i Service Manual

60 Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual
Chapter 5—Media Supply
5.3 External Supply
Regardless what types of internal media supply devices, right-hand doors,
or media guides are fi tted in the EasyCoder PF2i, PF4i, or PF4i Compact
Industrial, it is possible to use an external supply placed behind the printer.
However, you cannot use an external supply when the printer is fi tted with
an 8-inch Megatop.
Usually, external supply is used for fan-folded tickets or tags. A set of
Quick-Load guides and possibly a short side door are recommended.
When using the standard edge guide, it is recommended to rotate the
guide to a vertical attitude.
When using an external supply, make sure to protect direct thermal media
from dirt, dust, direct sunlight, and any substances that may affect the
heat-sensitive layer.

Intermec EasyCoder PF2i Specifications

General

Brand	Intermec
Model	EasyCoder PF2i
Category	Printer Accessories
Language	English