16 Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual
Chapter 1—Models and Options
Power Supply
AC Voltage 90 to 265 VAC, 45 to 65Hz
PFC Regulation IEC 61000-3-2
Power Consumption Standby 15W; Peak 300W
Sensors
Label Gap/Black Mark/Out of Media Yes 5 fi xed positions
Printhead Lifted Yes
Ribbon End/Ribbon Low Yes
Controls
Control Lamps 3
Display 2 × 16 character LCD with background light
Keyboard Fingerprint: 22 keys; IPL; 7 keys Membrane-switch type
Print button 1
Beeper Yes
Data Interfaces
Serial 1×RS-232 + 1×USB USB not supp. by IPL
Bar Code Wand 1 Not supported by IPL
Connection for Interface Boards 1 + 1 1 EasyLAN + 1 other
Memory Card Adapter 1 CompactFlash cards
Accessories and Options
Special Printheads 8 dots/mm: Thick media
11.81 dots/mm: Standard and Thick media
203.2 dpi
300 dpi (not IPL)
Paper Cutter Option For cut-off operation
Paper Cutter Tray Option For cut-off operation
Intergral Self-strip Unit w. Liner Takeup Option For peel-off operation
Rotating Media Supply Hub Option
3-inch Adapter Option For media supply hub
Long Side Door Option
3
Long Side Door with 8-inch Megatop Option
3
Label Taken Sensor Option
Real Time Clock Option (not IPL) 10+ years life
RS-232 Interface Cable Option
Parallel Interface Cable Option
IEEE 1284 Parallel Interface Board Option
Double Serial Interface Board Option (not IPL)
Serial/Industrial Interface Board Option (not IPL)
EasyLAN Ethernet Interface Option Model EasyLAN100i2
EasyLAN Wireless Interface Option Model Wireless100i2
External Alphanumeric Keyboard Option (not IPL)
CompactFlash Cards Option 8MB to 1GB; not CF+
CompactFlash Card Protection Plate Option
1
/. The max. print length is also restricted by the amount of free SDRAM memory.
2
/. Latin, Greek, and Cyrillic fonts according to Unicode standard are included.
3
/. Type of door fi tted at delivery depends on model.
To Next Page
Loading...
Need help?
General
