Intermec EasyCoder PF2i - Page 259

Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual 251
Appendix A—Program Overviews
Setup Mode Overview (IPL v2.10) Media
CONFIG:
CONTINUOUS
CONFIG:
MARK
SETUP:
MEDIA
MEDIA :
MEDIA TYPE
MEDIA TYPE:
GAP
MEDIA :
PAPER TYPE
Continued from
the previous page
Continued on
the next page
Scroll forward
Scroll back
CONFIG:
TTR
PAPER TYPE:
DT
MEDIA :
LABEL LENGTH
LABEL LENGTH:
1200
Scroll forward
Scroll back
Scroll forward
Scroll back
Scroll forward
Scroll back
MEDIA :
SENSITIVITY
SENSITIVITY:
420
Scroll forward
Scroll back
MEDIA :
DARKNESS
DARKNESS:
0
Scroll forward
Scroll back
MEDIA :
LBL REST POINT
LBL REST POINT:
0
MEDIA :
FORM ADJ DOTS X
FORM ADJ DOTS X:
0
MEDIA :
FORM ADJ DOTS Y
FORM ADJ DOTS Y:
0
100/200/400/800/
1200/1600/2000/
2500/3000/3600/
4200/4800
130/140/160/180/
366/420/440/450/
470/480/513/527/
567/627/677/687/
864
0/1/2/3/4/5/6/7/8/
9/10/-10/-9/-8/-7/
-6/-5/-4/-3/-2/-1
0/2/4/6/8/10/15/
20/25/30/-30/-25/
-20/-15/-10/-8/-6/
-4/-2
Scroll forward
Scroll back
0/2/4/6/8/10/15/
20/25/30/-30/-25/
-20/-15/-10/-8/-6/
-4/-2
Scroll forward
Scroll back
0/2/4/6/8/10/15/
20/25/30/-30/-25/
-20/-15/-10/-8/-6/
-4/-2