64 Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual
Chapter 6—Transfer Ribbon Mechanism
Replacement
• Pry the two legs of the snap-lock in the bobbin apart using a pair of fl at-
tipped screwdrivers while pulling out the bobbin with the spring clutch
and hub. Avoid removing the hub and spring clutch from the bobbin.
• If the shaft needs to be removed, use a piece of isolating tape to protect
the shaft from being scratched by the tool.
• Reassemble in reverse order.
To Next Page
Loading...
