Need help?Do you have a question about the Intermec EasyCoder PX6i and is the answer not in the manual?
General| Print technology | Direct thermal |
|---|---|
| Maximum resolution | 203 x 203 DPI |
| Display | LCD |
| Product color | Silver |
| Standard interfaces | RS-232, USB 2.0 |
| Internal memory | 16 MB |
| Media thickness | 2.4/10 mm |
| Maximum label width | 170 mm |
| Maximum label length | 4 m |
| Maximum roll diameter | 213 mm |
| Maximum internal memory | 1 GB |
| Supported network protocols | TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II |
| Power requirements | 90 - 265 VAC, 45 - 65Hz |
| Power consumption (standby) | 20 W |
| Power consumption (printing) | 125 W |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 40 - 104 °F |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 482 mm |
|---|---|
| Width | 238 mm |
| Height | 335 mm |
| Weight | 14800 g |
Detailed overview of the EasyCoder PX6i printer's features, resolution, speed, and capabilities.
Crucial safety warnings and precautions for handling and operating the Intermec printer.
Guidance on connecting power, computer interfaces (RS-232, USB), and optional boards.
How startup files (autoexec.bat) determine printer behavior upon power-on.
Detailed steps for loading thermal transfer ribbons into the printer.
Default configuration parameters for serial communication, media, and print definitions.
Detailed guide to configuring serial communication, feed adjustments, media, and print settings.
Methods to access the printer's setup mode via Intermec Shell or custom programs.
Procedure to enter Intermec Shell and select applications or facilities.
Understanding the printer's readiness status indicated by the blue IRI light.
Comprehensive list of error/event messages, IRI status, and their comments for diagnosing issues.
Step-by-step guide for cleaning the printer's printhead using cleaning cards.
Detailed procedure for replacing the printer's worn-out printhead.
Steps to safely remove jammed media from the print mechanism.
Guide on adjusting printhead pressure for optimal print quality and longevity.
How to align and test the label stop sensor for accurate media detection.
Comprehensive technical data including printing, firmware, physical measures, and power specs.
Protocol settings, signal meanings, and interface cable information for the RS-232 port.
Information on using the USB interface for printing and its limitations.
To Next Page
