EasyManuals Logo

Intermec EasyCoder PX6i User Manual

Intermec EasyCoder PX6i
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
EasyCoder PX6i User’s Guide (Fingerprint version) 101
Chapter 10 — Troubleshooting
Symptom Possible Cause Remedy Refer to
Overall weak print-
out
Wrong Paper Type
parameter
Change parameter Chapter 6
Contrast value too
low
Change parameter Chapter 6
Printhead pressure
too low
Adjust Chapter 12
Worn printhead Replace printhead Chapter 11
Wrong printhead
voltage
Replace CPU board
Call Service
Printout weaker on
one side
Uneven printhead
pressure
Adjust arm align-
ment
Chapter 12
Weak spots Foreign particles on
media
Clean or replace Chapters 4 & 5
Media/ribbon dont
match
Change to matching
media
Chapter 6
Poor media or
ribbon quality
Select a better brand
of media or ribbon
Chapter 6
Worn printhead Replace printhead Chapter 11
Worn platen roller Check/replace
Call Service
Overall dark print-
out
Wrong Paper Type
parameter
Change parameter Chapter 6
Contrast value too
high
Change parameter Chapter 6
Printhead pressure
too high
Adjust Chapter 12
Wrong printhead
voltage
Replace CPU board
Call Service
Excessive bleeding Wrong Paper Type Change parameter Chapter 6
Contrast value too
high
Change parameter Chapter 6
Printhead pressure
too high
Adjust Chapter 12
Faulty energy
control
Replace CPU board
Call Service
Dark lines along
media path
Foreign objects on
printhead
Clean printhead Chapter 11

Table of Contents

Other manuals for Intermec EasyCoder PX6i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intermec EasyCoder PX6i and is the answer not in the manual?

Intermec EasyCoder PX6i Specifications

General IconGeneral
Print technologyDirect thermal
Maximum resolution203 x 203 DPI
DisplayLCD
Product colorSilver
Standard interfacesRS-232, USB 2.0
Internal memory16 MB
Media thickness2.4/10 mm
Maximum label width170 mm
Maximum label length4 m
Maximum roll diameter213 mm
Maximum internal memory1 GB
Supported network protocolsTCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements90 - 265 VAC, 45 - 65Hz
Power consumption (standby)20 W
Power consumption (printing)125 W
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)40 - 104 °F
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth482 mm
Width238 mm
Height335 mm
Weight14800 g

Related product manuals