Intermec EasyCoder PX6i User Manual

144 EasyCoder PX6i User’s Guide (Fingerprint version)
Appendix D — Intermec Supplies
Direct Thermal Media
Intermec offers two quality grades of direct thermal media for the Easy-
Coder printers:
Premium Quality
Top-coated media with high demands on printout quality and resistance
against moisture, plasticizers, and vegetable oils. Examples:
Europe North America
Thermal Top Board Duratherm II
Thermal Top Duratherm II Tag
Thermal Top High Speed Duratherm Lightning
Duratherm Lightning Plus
Duratherm IR
Economy Quality
Non top-coated media with less resistance to moisture, plasticizers,
and vegetable oils. In all other respects, it is equal to Premium Quality.
Examples:
Europe North America
Thermal Eco –
Thermal Eco Board

Intermec EasyCoder PX6i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	170 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	335 mm
Weight	14800 g