Intermec EasyCoder PX6i User Manual

150 EasyCoder PX6i User’s Guide (Fingerprint version)
Appendix D — Intermec Supplies
Recommended Paper Type Settings
(North America)
Direct Thermal Printing; 8 dots/mm (203.2 dpi)
Type/Speed Name Label Label Max Rec. Print Speed
1
Constant Factor Dir 1&3
2
Dir 2&4
3
Top Coated/ Duratherm II 95 40 200 200
Duratherm II-2 85 40 200 200
Standard Duratherm II Tag
4
75 40 200 200
Top Coated/ Duratherm Lightning 63 40 200 200
High Duratherm Lightning Plus 72 40 200 200
Duratherm Lightning IR 62 40 150 200
Duratherm Lightn. IR Tag 107 40 100 200
Thermal Transfer Printing; 8 dots/mm (203.2 dpi)
Type/Speed Name Ribbon Ribbon Label Max Rec. Print Speed
1
Constant Factor Offset Dir 1&3
2
Dir 2&4
3
TMX 1500 Duratran II Label 52 25 0 175 175
Duratran II Syntran 51 25 0 175 175
Duratran Kimdura 56 25 0 175 175
Duratran S 52 25 0 175 175
Duratran II Tag 56 25 0 175 175
TMX 2200 Duratran II Labels 59 25 0 175 175
Duratran II Syntran 60 25 0 175 175
Duratran Kimdura 66 25 0 175 175
Duratran Valeron 77 25 0 175 175
Duratran S 59 25 0 175 175
Duratran II Tag 66 25 0 175 175
TMX 3200 Duratran II Gloss Polyester 85 25 0 200 150
1
/. Exceeding the recommended print speed may cause the printhead to wear out prema-
turely. If the ambient temperature is lower than +15°C (+59°F), decrease print speed by
50 mm/sec.
2
/. Applies to printing of text, lines, boxes, images, and picket fence bar codes.
3
/. Applies to ladder bar codes.
4
/. Requires high printhead pressure (see Chapter 12 “Adjustments, Printhead Pressure”).

Intermec EasyCoder PX6i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	170 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	335 mm
Weight	14800 g