Intermec EasyCoder PX6i User Manual

0ICKET&ENCE
,ADDER
&EED
$IRECTION
EasyCoder PX6i User’s Guide (Fingerprint version) 147
Appendix D — Intermec Supplies
Bar Code Directions
In the tables on the pages that follow, different maximum print speeds
may be recommended depending on the direction of possible bar codes
in the printout. Generally, ladder style bar codes are more demanding
and may require a lower print speed, especially in connection with a
large media roll and/or negative start adjust values (see “Print Speed” in
Chapter 6). The illustration below shows how the two type of bar code
directions relate to the media feed direction.
Dir 1 & 3
Dir 2 & 4
Bar Code Directions

Intermec EasyCoder PX6i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	170 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	335 mm
Weight	14800 g