EasyCoder PX6i User’s Guide (Fingerprint version) 95
Chapter 9 — Options
The LTS can be enabled or disabled using the instructions LTS& ON
and LTS& OFF respectively in Intermec Fingerprint and the Intermec
Direct Protocol.
Real Time Clock
This factory- or fi eld-installed circuit (RTC) relieves the operator or the
host from having to set the clock/calendar using the Intermec Fingerprint
instructions DATE$ and TIME$ after each power up. The RTC has its
own backup battery backup that will last 10 years or more.
CompactFlash Protection Plate
The protection plate encloses an inserted CompactFlash card and makes
it more diffi cult to steal, see illustration in Chapter 3. Operator-installed.
Alphanumeric Keyboards
The overlay of the printer’s built-in keyboard can be replaced with an
alphanumeric overlay. However, such a keyboard requires an application
program created using the Intermec Fingerprint programming language.
External alphanumeric keyboards can be connected to the serial port.
Interface Boards
A number of interface boards are available for use with the EasyCoder
PX6i printer. The interface boards are either factory-fi tted or can easily
be fi tted by an authorized service technician.
The EasyCoder PX6i can accommodate one EasyLAN interface board
plus one or two other interface boards.
EasyLAN boards:
• EasyLAN Ethernet interface
• EasyLAN Wireless interface
Other communication boards:
• Parallel Interface Board (IEEE 1284)
• Double Serial Interface Board
• Serial/Industrial Interface Board
To Next Page
Loading...
Need help?
General
Weight and Dimensions
