Intermec EasyCoder PX6i User Manual

EasyCoder PX6i User’s Guide (Fingerprint version) 149
Appendix D — Intermec Supplies
Direct Thermal Printing; 11.81 dots/mm (300 dpi)
Type/Speed Name Label Label Max Rec. Print Speed
1
Constant Factor Dir 1&3
2
Dir 2&4
3
Top Coated/ Thermal Top Board
4
94 40 225 150
Standard Thermal Top 81 40 225 200
Thermal IR 105 40 225 100
Non Top Coated/ Thermal Eco 74 40 225 225
Standard Thermal Eco Board
4
70 40 225 200
Top Coated/High Thermal Top High Speed 85 40 225 225
Thermal Transfer Printing; 11.81 dots/mm (300 dpi)
Type/Speed Name Ribbon Ribbon Label Max Rec. Print Speed
1
Constant Factor Offset Dir 1&3
2
Dir 2&4
3
GP02 TTR Uncoated 63 25 0 225 225
TTR Coated 64 25 0 225 225
TTR Premium 56 25 0 225 225
HP66 TTR Coated 84 25 0 225 225
TTR Premium 71 25 0 225 225
TTR Premium Board
4
99 25 0 225 225
TTR High Gloss White 86 25 0 225 225
TTR Polyethylene 71 25 0 225 225
TTR Gloss Polyethylene 82 25 0 225 225
HP05 TTR Coated 79 25 0 225 225
TTR Premium 72 25 0 225 225
TTR Premium Board
4
85 25 0 225 225
TTR High Gloss White 81 25 0 225 225
TTR Polyethylene 70 25 0 225 225
TTR Gloss Polyethylene 79 25 0 225 225
HR03 TTR High Gloss Polyester 81 25 0 175 225
1
/. Exceeding the recommended print speed may cause the printhead to wear out prema-
turely. If the ambient temperature is lower than +15°C (+59°F), decrease print speed by
50 mm/sec.
2
/. Applies to printing of text, lines, boxes, images, and picket fence bar codes.
3
/. Applies to ladder bar codes.
4
/. Requires high printhead pressure (see Chapter 12 “Adjustments, Printhead Pressure”).

Intermec EasyCoder PX6i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	170 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	335 mm
Weight	14800 g