Intermec EasyCoder PX6i User Manual

#
LOSE
D
/
P
EN
#
LOSED
/
PEN
#
LOSE
D
/
P
E
N
8 9
10 11
EasyCoder PX6i User’s Guide (Fingerprint version) 23
Chapter 4 — Media Load
This diagram shows the media path.
Adjust the position of the green edge
guides so the media is guided with a
minimum of play.
Tear-Off , cont.
Turn the printhead lift lever to ”Closed”
position.
Return the locking handle to closed
position.

Intermec EasyCoder PX6i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Product color	Silver
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Media thickness	2.4/10 mm
Maximum label width	170 mm
Maximum label length	4 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Power requirements	90 - 265 VAC, 45 - 65Hz
Power consumption (standby)	20 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	482 mm
Width	238 mm
Height	335 mm
Weight	14800 g