Intermec EasyLAN 10I2 User Manual

EasyLAN 10i2 Ethernet Adapter User’s Manual
2-12
2. Click the service name for the service you want to configure. The following page
appears.
3. Configure the parameters. For information on the parameters, see “Port Services
Parameters Defined” later in this section.
4. Click Submit. A page appears letting you know that your changes were successful.
5. Click OK to return to the Configuration and Management page.
Port Services Parameters Defined
Parameter Definition Values
Service name Enter the name of the service. Any ASCII characters
Default =
INTERMEC
nnnnnn
_
P1 where
nnnnnn
is
the last six digits of
the MAC address
Service port Select the port that the service runs on. P1
Protocols Choose the protocols the service uses to communicate. TCP/IP, NetWare,
DLC, NetBIOS
Default = TCP/IP,
NetWare, DLC

Intermec EasyLAN 10I2 Specifications

General

Brand	Intermec
Model	EasyLAN 10I2
Category	Adapter
Language	English