EasyLAN 10i2 Ethernet Adapter User’s Manual
3-8
Reload Firmware Page
2. In the Reload on submit row, choose Enable to reload the firmware when you click
submit. If you choose Disable, the firmware will not be loaded.
3. In the Firmware File Name row, enter the file name for the firmware. If the new
firmware is not in the
/TFTP
directory (TFTP server) or the
/LOGIN
directory
(NetWare server), enter the path for the firmware before the file name.
If you are using the SolarWinds TFTP server on a Windows 95/98 PC, you need to
enter ./ before the file name for the firmware. For more information about using the
SolarWinds TFTP server, see the readme.txt for the SolarWinds TFTP server on
your PrinterCompanion CD.
4. If the new firmware is on your TFTP server, enter the IP address for the TFTP
server in the form n.n.n.n where n is from 0 to 255.
If the new firmware is on your NetWare server, enter the name of the Netware
server.
5. Click Submit. If you enabled reload on submit, the firmware is sent to the EasyLAN
10i2 adapter, and a message page appears letting you know the reload was
successful.
6. Click OK to return to the Configuration and Management page.
To Next Page
Loading...
Need help?
General
