Intermec EasyLAN 10I2 User Manual

Console Commands
A-5
A
General Commands (continued)
Command Description
set port p1 dvid status
Enables or disables 1284 device ID queries on the parallel
port. Where
status
equals en for enabled or dis for disabled.
set port p1 ecp status
Enables or disables 1284 ECP mode on the parallel port.
Where
status
equals en for enabled or dis for disabled.
set port p1 fstb status
Enables or disables Fast Strobe mode on the parallel port.
Where
status
equals en for enabled or dis for disabled.
set port p1 nbuf status
Enables or disables no buffering on parallel port. Where
status
equals en for enabled or dis for disabled.
set pro password
Sets the console protection password to prevent access to set
commands. (Use unprotect command to access set commands.)
set serve de
Sets the node description string displayed with the show server
command.
set serve str n “…”
Defines the EasyLAN 10i2 adapter’s BOT/EOT string.
set servi servicename
protocol status
Enables or disables specified protocol on the specified service.
Where
servicename
is the name of the service you are
modifying,
protocol
is the protocol you want to enable or
disable, and
status
equals en for enabled or dis for disabled.
set servi servicename
bot nn
Sets the service BOT string. Where
servicename
is the name of
the service you are modifying and
nn
is the BOT string.
set servi servicename
eot nn
Sets the service EOT string to
nn
. Where
servicename
is the
name of the service you are modifying and
nn
is the EOT
string.
set servi servicename
fi nn
Sets the service filter to
nn
. Where
servicename
is the name of
the service you are modifying and
nn
is the service filter.
set servi servicename
fms matchnumber
Sets the service with the specified match string number. Where
servicename
is the name of the service you are modifying and
matchnumber
is the match string number.
set servi servicename
frs replacenumber
Sets the service with the specified replacement string number.
Where
servicename
is the name of the service you are
modifying and
replacenumber
is the replacement string
number.
set servi ip
servicename status
Enables or disables IP jobs. Where
servicename
equals the
name of the service and
status
equals en for enabled or dis for
disabled.

Intermec EasyLAN 10I2 Specifications

General

Brand	Intermec
Model	EasyLAN 10I2
Category	Adapter
Language	English