Intralox ThermoDrive - Page 11

LIST OF FIGURES
LOF
Belt Splicing System v.2.0
Figure 14H: Inspect cut ............................... 14- 3
Figure 14I: Place thin Belt Tabs on
Grooved Decks ........................................... 14- 4
Figure 14J: Inspect with square edge........... 14- 4
Figure 14K: Inspect touching ends............... 14- 4
Figure 14L: Clamp belt edges securely ........ 14- 5
Figure 14M: Maintain control of the
Crank Handle .............................................. 14- 5
Figure 14N: Inspect drive bar alignment ....... 14- 6
PREVENTIVE MAINTENANCE
15 PERFORM PREVENTIVE
MAINTENANCE