EasyManua.ls Logo

Invacare Solara User Manual

Invacare Solara
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Service Manual
DEALER: Keep this manual. The
procedures in this manual MUST be
performed by a qualified technician.
For more information regarding
Invacare products, parts, and services,
please visit www.invacare.com
Solara
and
Solara
Limited

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Invacare Solara and is the answer not in the manual?

Invacare Solara Specifications

General IconGeneral
Weight Capacity300 lbs
Seat Depth16 inches
Tilt Range45 degrees
Weight220 lbs
ArmrestsYes
LegrestsYes
Seat Width18 inches

Summary

SECTION I—GENERAL GUIDELINES

ANTERIOR (FORWARD) TILT

Precautions and correct usage of the anterior tilt feature.

STABILITY- ALL MODELS

Factors affecting wheelchair stability and adjustments by technicians.

STABILITY - ALL MODELS EXCEPT RECLINERS

Maintaining stability by positioning rear wheels correctly.

STABILITY - RECLINER MODELS ONLY

Stability considerations for recliner models and anti-tipper use.

SECTION 2-SAFETY INSPECTION TROUBLESHOOTING

SAFETY INSPECTION CHECKLISTS

Procedures for initial setup and regular safety checks.

TROUBLESHOOTING

Solutions for common issues like veering, sluggishness, and rattles.

SECTION 3-MAINTENANCE

MAINTENANCE SAFETY PRECAUTIONS

Safety measures before and after adjustments or repairs.

SECTION 4-ASSEMBLY

ASSEMBLING THE SOLARA WHEELCHAIR

Step-by-step guide for assembling the Solara wheelchair.

SECTION 5-SEAT

ADJUSTING SEAT-TO-FLOOR HEIGHT

Guidelines and restrictions for adjusting seat-to-floor height.

SECTION 6-ARMS

REPLACING/REPOSITIONING CANTILEVER ARM LOCKING LEVER

Steps to replace or reposition the cantilever arm locking lever.

SECTION 7-BACK

ADJUSTING BACK ANGLE

Steps to adjust the back angle of the wheelchair.

SECTION 8-WHEELS

INSTALLING/REMOVING/ADJUSTING CASTER/FORK

Steps for installing, removing, and adjusting casters and forks.

REPLACING THE AXLE PLATE

Steps to remove and install a new axle plate.

REPOSITIONING AXLE PLATE

How to reposition the axle plate for desired seat-to-floor height.

REPOSITIONING AXLE BUSHING

Steps to reposition the axle bushing to adjust wheelbase.

SECTION 9—TILT-IN-SPACE

REMOVING/INSTALLING TRIGGER RELEASE LEVER WITH CABLE

Procedures for removing and installing the trigger release lever and cable.

Related product manuals