Inxpect SRE 200 Series - 11.3 Electrical connections

11.3 Electrical connections
11.3.1 Connection of safety outputs to the Programmable Logic Controller
Digital I/Osettings (through the Inxpect Safety application)
Digital input #1 Not configured
Digital input #2 Not configured
Digital output #1 Detection signal 1
Digital output #2 Detection signal 1
Digital output #3 Not configured
Digital output #4 Not configured
11. Technical references
Inxpect SRE 200 Series | Instruction manual v1.5 DEC 2023|Inxpect SAF-IM-200S_5m_7_00047_en_v1.5|© 2021-2023 Inxpect SpA
111