9.4.13 SD Backup or restore error (SD BACKUP OR RESTORE ERROR)
Error Meaning
GENERIC FAIL Unknown fault
TIMEOUT Writing and reading internal operation timeout
NO_SD microSD not present
WRITE OPERATION
FAILED
Writing error on the microSD card
CHECK OPERATION
FAILED
File corrupted or no file during restore from microSD card
9.4.14 Sensor configuration errors (SENSOR CONFIGURATIONERROR)
Error occurred on the sensors during the configuration process or at the system power up. At least one of the
connected sensors did not get the correct configuration.
As details, the list of sensors not configured is reported.
9.5 ERRORevents (sensor)
9.5.1 Introduction
A diagnostic error is logged every time the periodic diagnostic functions detect a coming or going fault on the
sensor.
WARNING! No sensor errors are available if the sensor is in muting.
Note: if requested by Technical Support, in Settings > Activity History, click Download sensor debug info to
download the files and forward them to Inxpect for debugging.
9.5.2 Sensor configuration error (SENSOR CONFIGURATION ERROR)
Error occurred on the sensors during the configuration process or at the system power up. At least one of the
connected sensors is not correctly configured.
The list of sensor configuration errors is the following:
Error Meaning
UNKNOWN MODEL-
TYPE
Unknown model-type
WRONG MODEL-
TYPE
Model-type different from the one set during system configuration
RADIO BANDWIDTH
n.a.
Selected radio bandwidth not supported
STATIC OBJECT
DETECTION n.a.
Static object detection not supported
CUSTOM TARGET
DETECTION n.a.
Custom target detection not supported
ADVANCED FOV n.a. Advanced field of view not supported
ANTI-MASKING REF Error occurred during the anti-masking reference grabbing
ANTI-ROTATION
REF
Error occurred during the anti-rotation around axes reference grabbing
TIMEOUT Timeout error occurred during the system recondition
ASSIGN NODE ID
ERROR
Error occurred during the Node ID setting of the system recondition
9. Troubleshooting
Inxpect SRE 200 Series | Instruction manual v1.5 DEC 2023|Inxpect SAF-IM-200S_5m_7_00047_en_v1.5|© 2021-2023 Inxpect SpA
97