Inxpect SRE 200 Series - 2.2 Conformity

Inxpect SRE 200 Series | Instruction manual v1.5 DEC 2023|Inxpect SAF-IM-200S_5m_7_00047_en_v1.5|© 2021-2023 Inxpect SpA
13
2.2 Conformity
2.2.1 STANDARDS AND DIRECTIVES
Directives 2006/42/EC (MD - Machinery)
2014/53/EU (RED - Radio equipment)
Harmonized
standards
EN ISO 13849-1: 2015 PL d
EN ISO 13849-2: 2012
IEC/EN 62061: 2021
ETSI EN 305 550-2 V1.2.1
IEC/EN 61010-1: 2010, A1:2019
ETSI EN 301 489-1 v2.2.3 (only emissions)
ETSI EN 301 489-3 v2.1.1 (only emissions)
IEC/EN 61000-6-2:2019
IEC/EN 62061: 2005, A1:2013, A2:2015, AC:2010 SIL 2
Non-harmonized
standards
IEC/EN 61326-3-1:2017
IEC/EN 61496-1: 2013 (section 5.4.2 and 5.4.4), AC:2015
IEC/EN 61496-1: 2020 (section 5.4.2 and 5.4.4)
IEC/EN 61508: 2010 Part 1-7 SIL 2
ETSI EN 305 550-1 V1.2.1
IEC TS 62998-1:2019
UL 61010-1
CAN/CSA 61010-1
UL 61496-1
CRD of IEC 61496-3
IEC/EN 61784-3-3:2016 for the PROFIsafe Fieldbus
IEC/EN 61784-3-12:2010, A1:2019 for FSoE Fieldbus
Note: no type of failure has been excluded during the system analysis and design phase.
All updated certifications can be downloaded from https://www.inxpect.com/en/downloads.
2.2.2 CE
The manufacturer, Inxpect SpA, states that Inxpect SRE 200 Series (Safety Radar Equipment) complies with the
2014/53/EU and 2006/42/EC directives. The full EU Declaration of Conformity text is available on the company's
website: https://www.inxpect.com/en/downloads.
2.2.3 UKCA
The manufacturer, Inxpect SpA, states that Inxpect SRE 200 Series (Safety Radar Equipment) complies with
Radio Equipment Regulations 2017 and Supply of Machinery (Safety) Regulations 2008. The full UKCA
Declaration of Conformity text is available on the company's website: https://www.inxpect.com/en/downloads.
2.2.4 OTHER CONFORMITIES AND NATIONAL CONFIGURATIONS
For a complete, up-to-date list of product conformities and any national configurations, please refer to the
National configuration addendum document. The PDFcan be downloaded from the site
https://tools.inxpect.com.
2. Safety