Inxpect SRE 200 Series - 11.4 Configuration application parameters

118
Inxpect SRE 200 Series| Instruction manual v1.5 DEC 2023 |Inxpect SAF-IM-200S_5m_7_00047_en_v1.5|© 2021-2023 Inxpect SpA
11. Technical references
11.3.8 Diagnostic output connection
Note: the cables used for wiring the digital inputs must have a maximum length of 30 m (98.4 ft).
Digital I/Osettings (through the Inxpect Safety application)
Digital input #1 Not configured
Digital input #2 Not configured
Digital output #1 Not configured
Digital output #2 Not configured
Digital output #3 System diagnostic signal
Digital output #4 Not configured
11.4 Configuration application parameters
11.4.1 Parameter list
Parameter Min Max Default value
Settings > Account
Password - - Not available