Parameter Min Max Default value
Settings > Restart function
Detection field 1, 2, 3, 4 Automatic, Manual, Safe manual Automatic
Settings > Activity History
Log verbosity level 0 5 0
Settings > Detection field groups
Detection field 1, 2, 3, 4 (for each sensor) None, Group 1, Group 2, Both None
Admin > Network Parameters
IP Address - 192.168.0.20
Netmask - 255.255.255.0
Gateway - 192.168.0.1
TCP port 1 65534 80
Admin > Fieldbus Parameters
System configuration and status PS2v6 1 65535 145
Sensors information PS2v6 1
65535
147
Sensor 1 detection status PS2v6 1
65535
149
Sensor 2 detection status PS2v6 1
65535
151
Sensor 3 detection status PS2v6 1
65535
153
Sensor 4 detection status PS2v6 1
65535
155
Sensor 5 detection status PS2v6 1
65535
157
Sensor 6 detection status PS2v6 1
65535
159
System configuration and status PS2v4 1
65535
146
Sensors information PS2v4 1
65535
148
Sensor 1 detection status PS2v4 1
65535
150
Sensor 2 detection status PS2v4 1
65535
152
Sensor 3 detection status PS2v4 1
65535
154
Sensor 4 detection status PS2v4 1
65535
156
Sensor 5 detection status PS2v4 1
65535
158
Sensor 6 detection status PS2v4 1
65535
160
Fieldbus endianness Big Endian, Little Endian Big Endian
FSoE Safe Address 1 65535 145
Admin > MODBUS Parameters
MODBUS Enable Enabled, Disabled Enabled
Listening port 1 65534 502
Admin > System labels
Control unit - -
Sensor 1 - -
Sensor 2 -
-
Sensor 3 - -
Sensor 4 - -
Sensor 5 - -
Sensor 6 - -
Admin > Users management
User name - -
Access level Admin, Engineer, Expert, Observer, Service Observer
11. Technical references
Inxpect SRE 200 Series | Instruction manual v1.5 DEC 2023|Inxpect SAF-IM-200S_5m_7_00047_en_v1.5|© 2021-2023 Inxpect SpA
121
To Next Page