Inxpect SRE 200 Series - Page 40

40
Inxpect SRE 200 Series| Instruction manual v1.5 DEC 2023 |Inxpect SAF-IM-200S_5m_7_00047_en_v1.5|© 2021-2023 Inxpect SpA
4. Functioning principles
In this example, both detection field 1 and 2 generate a detection signal, for target [A] and [B] respectively.
In this example, detection field 1 generates a detection signal for target [A] but target [B] could not be detected.
In the Inxpect Safety application, click on Settings > Advanced > Detection field dependency to set the
dependency mode of the detection fields.