Inxpect SRE 200 Series - Page 54

54
Inxpect SRE 200 Series| Instruction manual v1.5 DEC 2023 |Inxpect SAF-IM-200S_5m_7_00047_en_v1.5|© 2021-2023 Inxpect SpA
7. Sensor position
The standard shapes of the field of view are described below. For 5.x sensors, the Classic and Corridor shapes
are available (see "Advanced field of view (5.x sensorsonly)" on page57).
7.2.2 Areas and dimensions of the field of view
The sensor field of view is composed of two areas:
l
detection field [A]:where detection of objects similar to humans in any position is guaranteed
l
tolerance area [B]:where the actual detection of a moving object/person depends on the characteristics of
the object itself (see "Factors that influence the reflected signal" on page37)
7.2.3 Dimensions for the access detection function
Note: the tolerance area dimensions described are related to the detection of humans.
The horizontal tolerance area is 20° greater than the angular coverage set.
Top view
Side view S201A model
Side view S203A model