Inxpect SRE 200 Series - Page 90

90
Inxpect SRE 200 Series| Instruction manual v1.5 DEC 2023 |Inxpect SAF-IM-200S_5m_7_00047_en_v1.5|© 2021-2023 Inxpect SpA
9. Troubleshooting
Example: Rel. 0 d 00:01:32
Note: when a new system configuration is performed, even the older timestamps are updated in absolute time
format.
Note: during system configuration, the control unit is receiving the local time of the machine where the software is
running.
9.2.7 Event description
A complete description of the event is reported. Whenever possible, depending on the event, additional
parameters are reported.
In case of a diagnostic event, an internal error code is also added, useful for the purpose of debug. If the
diagnostic event disappears, the label “(Disappearing)” is reported as an additional parameter.
Examples
Detection access (field #3, 1300 mm/40°)
System configuration #15
CANERROR (Code: 0x0010) COMMUNICATION LOST
CANERROR (Disappearing)