11 License agreement ise smart connect KNX Sonos software
Hereinafter are the contract terms for your use of the software as the "Licensee".
By accepting this agreement and installing the ise smart connect KNX Sonos software or putting the ise
smart connect KNX Sonosinto use, you conclude an agreement with ise Individuelle Software-
Entwicklung GmbH and agree to be legally bound to the terms of this agreement.
11.1 Definitions
Licensor: ise Individuelle Software-Entwicklung GmbH, Oldenburg, Kaiserstraße 14, Germany.
Licensee: The legal recipient of the ise smart connect KNX Sonos software.
Firmware: Software which is embedded on the ise smart connect KNX Sonos hardware and enables
operation of the ise smart connect KNX Sonos.
ise smart connect KNX Sonos software: The ise smart connect KNX Sonos software designates all
of the software provided for the ise smart connect KNX Sonos product, including the operating data.
This includes, in particular, the firmware and the product database.
11.2 Object of the agreement
The object of this agreement is the ise smart connect KNX Sonos software provided on data media or
through downloads, as well as the corresponding documentation in written and electronic form.
11.3 Rights of use of the ise smart connect KNX Sonos software
The Licensor grants the Licensee the non-exclusive, non-transferable right to use the ise smart connect
KNX Sonos software for an unlimited time in accordance with the following conditions for the purposes
and applications specified in the valid version of the documentation (which shall be provided in printed
form or also as online help or online documentation).
The Licensee is obliged to ensure that each person who uses the program only does so as part of this
license agreement and observes this license agreement.
11.4 Restriction of rights of use
Copying, modification and transmission
The Licensee is not authorised to use, copy, modify or transfer the ise smart connect KNX Sonos soft-
ware in whole or in part in any way other than as described herein. Excluded from this is one (1) copy
produced by the Licensee exclusively for archiving and backup purposes.
Reverse engineering and conversion technologies
The licensee is not authorised to apply reverse-engineering techniques to the ise smart connect KNX
Sonos software or to convert the ise smart connect KNX Sonos software to another form. Such tech-
niques include, in particular, disassembly (conversion of the binary-coded computer instructions of an
executable program into an assembler language which can be read by humans) or decompilation (con-
version of binary-coded computer instructions or assembler instructions into source code in the form of
high-level language instructions).
Firmware and hardware
The firmware may only be installed and used on the hardware (ise smart connect KNX Sonos) ap-
proved by the Licensor.
Transfer to a third party
The ise smart connect KNX Sonos software may not be passed on to third parties, nor may it be made
accessible to third parties.
Renting out, leasing out and sub-licensing
The Licensee is not authorised to rent or lease the ise smart connect KNX Sonos software or grant
sub-licenses to the program.
To Next Page
Loading...