ISE Sonos - Sonos as a Smart Door Gong

ise smart connect KNX Sonos
Application scenarios – Comfort solutions in the living
environment
Order No. 1-0001-002
Product Manual Page 8 (76)
2.2 Sonos as a smart door gong
This application makes the Sonos sound system a smart door gong.
Two versions are possible:
 The volume in one or more (all) groups is reduced, and the standard door gong can then be heard
in the house.
 Music playback in one or more (all) groups is stopped, and a door signal is heard in these groups.
o The signal can be selected as desired and must be saved in a common format (e.g. MP3
file) on the microSD card of your ise smart connect KNX Sonos; alternatively, there is a
playlist for this purpose.
o This loading occurs during the day in the entire house. With sleeping children in mind, the
signal is only heard in the parent zone at night.
o Even if you're listening to loud music, you'll always know there's a guest at the door be-
cause all music playback is muted for the door gong.
KNX-TP bus
line
IP data network
Ethernet
ise smart connect KNX
Sonos
KNX sensor reports:
Doorbell pressed.
Time clock (or other sys-
tem device) for querying
the time.
The ise smart connect KNX
Sonos converts KNX command
to Sonos commands (IP).
The Sonos sound systems
plays an audio file with a door-
bell sound from the SD card
over all Sonos devices during
the day and only in the parent
zone at night (group creation).
Doorbell button
at KNX binary
input