ITech IT7900P Series User Manual

System-Related Functions
Copyright ©ITECH Electronic Co., Ltd. 102
Freq limit+
Set the upper limit of output
frequency.
Freq limit-
Set the lower limit of output
frequency.
Exception
Set the output mode when the
frequency lock fails:
⚫ Output Disable: stop output
⚫ Limit: Output according to the
set frequency.
External
programme
External analog function:
Status
Set the ON/OFF state
Mode
AM: Adjust the amplitude
Amplifier: Real-time output and
power Amplifier.
Monitor phase
Select the phase to monitor.
This cannot be set in single phase
mode.
U ratio
The external program ratio of
voltage.
I ratio
The external program ration of
current.
Remote sense
Set the sense function state.
Mode
On: Enable the remote sense
Measurement
Off: disable the sense function
On/Off phase
On-mode
Output on phase control
Phase: setting the phase
Imm: immediately
Off-mode
Output off phase control
Phase: setting the phase
Imm: immediately
Measurement
Set the measurement speed
Lower
（1000ms）
Lower mode, measuring every
1000ms
Slow（500ms）
Slow mode, measuring every
500ms
Medium
（300ms）
Medium mode, measuring every
300ms
Fast（150ms）
Fast mode, measuring every
150ms
Filter
Whether to turn on the filter during
measurement.
Menu of Load mode:
Load
Device operation
mode
Set the instrument mode
Volt Source: voltage source load
Load: load mode
Phase mode
Set the AC input mode
1-Phase
Single phase
3-Phase
Three phase

ITech IT7900P Series Specifications

General

Brand	ITech
Model	IT7900P Series
Category	Power Supply
Language	English