ITech IT7900P Series User Manual

System-Related Functions
Copyright ©ITECH Electronic Co., Ltd. 103
Reverse
Reverse phase
Couple mode
Set input mode
AC
AC mode
DC
DC mode
Load C phase loss
C phase disabled mode
Disable
Disable this function
Enable
Enable this function
Rectified
Rectified function switch
On
Enable rectified mode
Off
Disable rectified mode
Integrity
Integrity mode
Full
Full waveform
Pasitive
Positive half waveform
Negative
Negative half waveform
OFF mode
Set the input turn off mode
Open-Z
Open circuit mode
High-Z
High impedance mode
Regulation speed
Regulation speed of load
Fast
Fast speed
Slow
Slow speed
External
Synchronization
External Synchronization
On/Off
Enable/disable External
Synchronization function
Phase delay
External input phase delay
BA
Phase delay for BA(only for three
phase mode)
CA
Phase delay for CA(only for three
phase mode)
External
programme
External analog function:
Status
Set the ON/OFF state
Mode
AM: Adjust the amplitude
Amplifier: Real-time input and
power Amplifier.
Phase
Select the phase to monitor.
This cannot be set in single phase
mode.
U ratio
The external program ratio of
voltage.
I ratio
The external program ration of
current.
Remote sense
Set the sense function state.
Mode
On: Enable the remote sense
Measurement
Off: disable the sense function
On/Off phase
On-mode
Input on phase control
Phase: setting the phase
Imm: immediately
Off-mode
Input off phase control
Phase: setting the phase
Imm: immediately
Measurement
Set the measurement speed

ITech IT7900P Series Specifications

General

Brand	ITech
Model	IT7900P Series
Category	Power Supply
Language	English