72
ALS 4.0 XE
PRODUCT MANUAL
EN
7.1 System Diagnostics and
Troubleshooting
This section will show how to diagnose, and trouble
shoot when there is a fault in the machine operation.
Touching icon 8 from the main screen will
open the Manual Screen, from this screen the
operator can view the status of all the machine
components, Axes drives and output of the
machine.
In the Manual Screen the areas marked #3 show the
status of the axis drives, if any of the axis has a red cross
the operator can touch icon #13 (Error Log) to see the
machine errors that was generated specic to the axis
at fault.
ERROR LOG (6) – Click or Touch on “ERROR LOG”
to open the error log contents. The error log
saves the following information:
(i) Date and time when error occurred.
(ii) Axis identication and error description.
(iii) Error code.
TROUBLESHOOTING GUIDE (14) – Click or
touch on “Troubleshooting guide” to open
Troubleshooting manual to get help with cause
and corrective action based on “error code”. The
error code can be read directly from the Error
code line can be read from the error log screen.
To nd the information on the specic error
code search for the code in the PDF.
RESET (5) – After completing the corrective
action click or touch “RESET”
Manual Screen
Error Log
Troubleshooting Guide (PDF)
Main Screen
7 Error Log Diagnostics
To Next Page
Loading...