Section 3 - Maintenance
Routine Maintenance
Service Schedules
3-6 3-6
9803/9390-2
External Oil Leaks - Check
Cooling, Screen, Radiator Matrix and Oil Cooler - Clean
Fuel Lift Pump - Clean
Engine Crank Case Breather - Change (2000
Hours)
TRANSMISSION
Wheel Nut Security - Check
Tyre Pressures (see Handbook) - Check
Front Wheel Bearing Play - Check
Axle Couplers - Grease
Front King Pins - Grease
Drive Chain - Lubricate
Drive Chain Tension - Check and Adjust
Transaxle Mounting Bolt Tightness - Check
CVT Oil - Change
CVT Oil Level - Check
ELECTRICS
Battery Electrolyte Level - Check
Battery Charge Condition - Check
Battery Terminals for Condition and Tightness - Check
Wiring for Chafing - Check
BODY AND FRAMEWORK
General Damage including ROPS - Check
ROPS Structure - Mounting/Integrity - Check
Seat Belt - Condition and Security (if fitted) - Check
(1) Fill slowly, ensure correct quantity is used.
(2) The Air Cleaner Element should be changed every 100 Hours if the machine is working in dusty conditions.
Pre-start Cold Checks, Service Points and
Fluid Levels
Operation 10 Hr
(Daily)
50 Hr 100 Hr
(First)
250 Hr 500 Hr 1000
Hr
To Next Page
Loading...