JDS Uniphase SmartClass E1 - Page 92

Chapter 6 VT100 Terminal Emulation
Emulating a VT100 terminal
76 SmartClass E1 Tester User’s Guide
9 To send commands using the E1/Datacom Tester keypad, press and hold
the *Action key and then select
Spcl Keys (the 7 key) or Keypad (the 2
key).
10 If you want to transmit a single space, or multiple space characters, view
the File menu and then select the number of spaces.
11 Optional. To save on-screen information to a file, do the following:
a Press and hold the *Action key and then press the 5 key to view the
File menu.
b Select Capture.
c Enter a file name, and then press the OK key.
You can view the saved file using the File Manager.
12 To exit, press and hold the *Action key, press the 5 key to view the File
menu, and then select Exit.
Menu item Function
Spcl Keys To send commands, such as backspace, delete, tab, and
return, select Spcl Keys. A list of special key functions
appears, including an option for function keys (F-keys).
To send commands, such as home, end, break, insert,
and page up/page down, select Spcl Keys, then select
Operator, and then select a command.
Keypad:ABC
Keypad:abc
Keypad:123
Changes the behavior of repeated key presses: alphanu-
meric (ABC or abc) or numeric (123).
Keys 0 through 9,
*, and #
Press a key on the keypad to send a character. Press the
key several times to view all the characters you can send
with that key. The characters appear in the upper right
corner of the
E1/Datacom Tester display.
For example, the 1 key lets you send the following char-
acters: #, space, _, &, $, %, <, >, +, and -.