• HS2TCHPRO
• HS2TCHPROBLK
Securing the premises
The PowerSeries Pro provides multiple arming modes as described below:
Away Mode Use this mode when there is nobody on the premises. Away mode activates all perimeter and
interior sensors in the alarm system.
Stay Mode Use this mode when someone is on the premises. Stay mode partially activates the alarm system by
arming all perimeter sensors and bypassing all interior sensors.
Night Mode Use when the perimeter and interior need to be armed but require limited movement without
activating the alarm (e.g., disable motion sensors in an area containing a washroom). Night mode is
similar to Stay mode but only bypasses internal sensors configured as Night Zones.
Note: Verify with the alarm company which modes are available. For SIA FAR listed panels, the
Stay arming Exit Delay will be twice as long as the Away arming Exit Delay.
Depending on the system configuration, there are multiple methods to arm the system.
Arm the system using a:
• Keypad
• Wireless Key
• Proximity Tag
Arming the system
You can arm the PowerSeries Pro system using a keypad, a wireless key, a proximity tag, or the
interactive partner portal.
Note: If your system is installed in accordance with SIA CP-01 Standard for False Alarm
Reduction, the security system arms in Stay Arm mode if the exit delay time expires and no one
has exited the premises.
Arming the system in Away mode using a keypad
Away mode activates the complete alarm system by:
• Arming all perimeter sensors.
• Arming all interior sensors.
Arming the system in Away mode
To arm the system in Away mode, complete the following steps:
1. Ensure that you close all windows and doors.
2. Ensure that the Ready indicator is on.
Note: You cannot arm the system until the Ready indicator is on.
3. Choose one of the following options:
- To quickly arm the system, press [*][0].
- To arm the system using the Away key, press and hold the Away key for 2 seconds. If it is
necessary, enter an access code, or present a proximity tag to the keypad reader.
If the system bypasses a zone, a warning appears on the keypad.
11PowerSeries Pro HS3032/HS3128/HS3248 User Manual
To Next Page
Loading...
