Johnson Controls Tyco PowerSeries Pro HS3032 - User Labels; Adding and Editing a User Label; Assigning a Partition to a User Code

User labels
You can add a user label using the keypad to give a user a unique name. You can input letters and
numbers using the keypad to add or edit user labels. Each number on the keypad corresponds to
three letters and one number. Press a number button once, twice, or three times on the keypad
to give you a different letter or number. For more information on what letter corresponds to each
number on the keypad, see the following table:
Table 5: Keypad numbers and corresponding letters
Keypad button Corresponding letter and number
1 A, B, C, 1
2 D, E, F, 2
3 G, H, I, 3
4 J, K, L, 4
5 M, N, O, 5
6 P, Q, R, 6
7 S, T, U, 7
8 V, W, X, 8
9 Y, Z, 9
0 0
Adding and editing a user label
To add a user label, complete the following steps:
1. On the keypad, press *5.
2. Enter your user access code.
3. Use the Arrow keys to navigate to a user label, and press *.
4. In the User Codes menu, navigate to User Labels and press *.
5. Use the number keys to enter a user label, and press *.
Assigning a partition to a user code
You can configure user codes to give access only to specific partitions. For more information, see
Managing partitions.
Note: The installer must configure the partitions.
To assign a partition to a user code, complete the following steps:
1. On the keypad, press * 5.
2. Enter your access code.
3. Use the Arrow keys to navigate to the user, and press *.
4. Navigate to Partition Assign, and press *.
5. Choose one of the following options:
- To grant the user access to the partition, select Y.
- To deny the user access to the partition, select N.
PowerSeries Pro HS3032/HS3128/HS3248 User Manual26