Quick reference
The PowerSeries Pro alarm system uses shortcut keys to access options or features on all models of
keypads. When using an LCD keypad, the PowerSeries Pro alarm system additionally uses a menu
based navigation system. Use the scroll keys to view the list of options contained within the current
menu.
Note: Some features must be enabled by the installer.
Note: Bypass Groups are not permitted in UL listed installations.
For SIA CP-01 classified installations, the Swinger Shutdown feature shall shut down the zone
after a programmable number of trips (the programmed default is 2). The zone is restored after a
manual reset by entering the access code at the time of disarming the alarm system, or it is reset
automatically after 48 hours with no trips on any zones.
The following tables provides an overview of the keypad status lights and keys.
Table 1: Keypad status lights
Status light Name Description
Ready
Indicates that the system is ready to arm. To arm the system this light must be on, and all
zones must be secure or bypassed.
Armed
Indicates that the system is armed. If the Ready light and the Armed light are both turned on,
an Exit Delay is in progress.
Trouble
Indicates that there is a system malfunction or a tamper issue. If the Trouble light flashes,
the keypad has a low battery condition. Correct the trouble condition to turn off this light. For
more information on correcting trouble conditions, see Troubleshooting.
AC power
Indicates that AC power is connected. The AC power light turns off when the AC power is
disconnected.
Table 2: Keypad keys
Key Key name Key type
Stay arm Function
Away arm Function
Chime Function
Reset Function
Quick exit Function
Fire alarm Emergency
Medical alarm Emergency
Panic alarm Emergency
7PowerSeries Pro HS3032/HS3128/HS3248 User Manual
To Next Page
Loading...
